No worries any more, no matter where you are.
Are my dogs being good at home? Have I close the door? Is the nanny taking good caer of my little girl?
Is everything ok at home? With the Sunmy HD wilress security camera, you can be in two (or more) places at once and be aware of everything happing at home, check on the things you care about - from anywhere.
720P/1080P High definition image, super infrared night vision, H.264 Video
Infrared HD Night Vision
Cutting-edge night vision technology allows you to get a crystal clear picture, even in total darkness. The camera is equipped with 12 infrared leds which high definition night vision. With the infrared technology, you\'ll never be in the dark again.
Real Plug& Play
355-Degree Rotation Pan and Tilt
View an entire area with fluid 355-degree pan/tilt visibility. Rotate within 355 degress in the horizontal direction and 120 degress in the vertical direction, no monitoring dead zone exists. Slide on your phone screen, you can then control the camera to switch to any direction you want to view.
Two way Audio, keep in touch with anyone you care.
To just see what is going on is far from enough. The Sunmy HD wireless camera allows you to be there with built-in two-way audio. You are able to talk with people at home and here what they same on your phone thorugh the camera\'s built-in speaker and mic. Whether on your computer or smartphone, everything you say or hear will come through clearly and instantly, so you can talk and listen like you never left.
Intelligent Alarming and Alert Message Sending
Once strangers intrudes the house, the camera will automatically give out an alarm and at the same time, send an alert message to your email. The suspecious person is scared away by the housekeeper camera to save you property loss.
Local video storage
It supports 3 record mode :Manual Recording/Alarm Recording/Scheduled Recording
Record and Playback Video
Support recording to micro SD card (up to 64GB, not included), With mobile app, playback video on mobile app and PC client.
| CPU: || Industrial embedded microcontroller GM8135S-QC |
| OS: || New optimized H.264 Baseline Profile compression algorithm |
| Image sensors: || 1.0MP CMOS sensor |
| Resolution: || 1280 * 720P |
| Frame rate: || 1-30 frame |
| Minimum illumination: || Daytime mode 1.5LUX, night vision mode 0.1LUX |
| Grab function: || YES |
| SNR: || ≥38dB |
| CMOS performance: || Support automatic white balance, automatic gain control, automatic backlight compensation |
| Lens / Viewing Angle: || 3.6mm megapixels @ F1.4 / 74 \' |
| Audio coding standard: || G.711A |
| Audio Input: || Built-in 45dB microphone |
| Audio output: || Built-in 8 ohm 1 watt speakers |
| Video mode: || Manual recording, timer recording, alarm recording |
| Recordings are saved: || ≤64G TF card(not include) |
| PTZ control: || Horizontal 355 degree, 120 degree up and down |
| Network Interface: || 10Mbps / 100Mbps adaptive / RJ45 interfaces |
| Network protocol: || TCP / IP, HTTP, TCP, UDP, SMTP, DHCP, DNS, DDNS, NTP, UPnP, P2P |
| wireless: || WiFi802.11b / g / n wireless network |
| Alarm Input: || Learning wireless sensor alarm input |
| Alarm Detection: || The maximum can be connected to 64 wireless alarm sensors, support for a key arm / disarm |
| Motion Detection: || YES |
| System Requirements: || iso7.0, Aandroid3.0 or later |
| Onvif agreement: || YES |
| Power consumption: || DC5V2A / 2.5W |
| Operating temperature: || -10 Celsius ~ 50Celsius |
| Working humidity: || ≤95% RH |
| Installation: || Rack mounting |
1 * Intelligent Camera
1* User Manual
SD Card not include
Real image from Valued Customers
3 ways to get "Yoosee" app
1),IOS user can download and install "Yoosee" in Apple official shop
2),Android user can enter website:" yoosee.co", download and install "Yoosee"
3),Also can input "yoosee.com" in the exploer to download it in PC, Android version and IOS version can scan the QR core to download the software directly, PC click CMS to download directly.
Setup in Wired Mode:
Warm tips: Before seup the camera, please press the "reset button" with 5- 7 seconds to factory reset.
1, Once powered on the camera, connect the NET interface on the camera with the net interface of router (Make sure open the DHCP function of the Router). The NET indicator will be on once network connection done.
2, Open the APP “ Yoosee” , click the “+” at the top right corner, select “ Add new device- Wired connection” , it will discover new device, then choose new device and enter password 123, the setting could be done.
Once connected successful , How to turn Wired to Wifi mode:
How to setup Alarm Alert:
In attemp to make you stay alarmed of all unexpected movements in your house, Motion detection works perfectly with email alert function making sure your are always the first one to get informed when things happen.
The software operation in PC
1.This wifi camera also support PC viewing, but only support Windows system.
2.After you configure the camera successfully on Yoosee app , open the CMS client software on computer .
3.The CMS client will detect the camera, but this camera doesn\'t support website browser viewing.